dB Buddy Support
dB Buddy™ app by Earasers®
Help and support for iPhone and Android
Contact us
Questions about the app, a problem to report, or a suggestion? Email info@earasers.net with “dB Buddy” in the subject. If you can, tell us your phone model, whether it’s iPhone or Android, and the app version (shown at the bottom of Settings). The Send feedback link at the bottom of Settings opens an email to us with the version already filled in.
What dB Buddy does
dB Buddy uses your phone’s microphone to estimate the sound level around you in dBA. It keeps a running total of your noise exposure and shows how long you can stay at the current level before reaching a daily limit (NIOSH, WHO or OSHA, your choice in Settings). It also estimates the level at your ear when you wear Earasers, and can suggest which Earasers filter suits the level you’re in.
dB Buddy is an awareness tool. Its readings are estimates. It is not a certified sound level meter, not for workplace compliance, and not medical advice. See the Terms of Use.
Common questions
The app shows no sound, or asks for the microphone
dB Buddy needs microphone access to measure. Turn it on here:
iPhone: Settings → Privacy & Security → Microphone → dB Buddy.
Android: Settings → Apps → dB Buddy → Permissions → Microphone → Allow.
Also check that your case doesn’t cover the microphone holes at the bottom of the phone. Thick or rugged cases can block them.
Is my sound recorded?
No. The microphone is used only to measure the sound level as it happens. No audio is recorded, saved or sent anywhere. Your session history stays on your phone. See the Privacy Policy.
My reading is different from a sound level meter
Phone microphones vary from model to model, so until you calibrate, levels are marked ≈ and can be several dB off. If you have access to a sound level meter, calibrate once in Settings → Microphone. Start with Broadband (one dBA reading from your meter). Octave calibration can then correct how the phone hears bass, middle and treble.
What does “Mic overloaded” mean?
Phone microphones have a limit, roughly 110 to 120 dB at the loudest peaks depending on the phone. When sound goes above it, the real level is higher than the app can show. The red “Mic overloaded” marker clears 3 seconds after the last overload, and the session still records it. Setting the phone down or knocking it can also cause a brief overload. The app detects that jolt and leaves it out of the warnings.
It’s too loud for my phone where I play or sing
Use Measure from across the room in Settings. In a one-time setup, a speaker at the sound source plays pink noise, and you measure where your ears are and then where the phone will stay. After that, the phone can sit farther away, where it doesn’t overload, and still show the level at your listening position. The setup stays saved but only holds while the phone, the sound source and your listening position stay where they were. If anything moves, set it up again.
Does it keep measuring when the screen is locked?
Yes. Once measuring has started you can lock the screen or use other apps. On iPhone you’ll see the microphone indicator at the top of the screen. On Android you’ll see a “dB Buddy is measuring sound” notification. Background measuring uses extra battery.
Which Earasers filter should I wear?
Open the Filter finder in the app. It compares the level you’re in with how long you’ll be there and suggests the Earasers filter that keeps you within your daily limit. While you measure, the “With Earasers” box also shows a recommendation every few seconds. You can buy Earasers at earasers.net.
My ears feel muffled or are ringing after loud sound
That means your ears had too much sound, whatever the app showed. Rest them in quiet. If the muffled feeling or new ringing doesn’t go away, see a hearing professional.
Legal
dB Buddy Terms of Use
dB Buddy Privacy Policy
dB Buddy™ app by Earasers®. Magnatone Hearing Aid Corp dba Persona Medical.